Resources for Serial Port Tool [1 - 12 of 12]
-
PTZ Controller PPC is an application for Pocket PC to control PTZ camera. It runs on PPC2003SE,WM5.0 and WM6.0. It can perform the full function of traditional hardware keyboard controller. It can control the PTZ camera through Pocket PC Compact Flash slot, and control RS232/485/USB port with a converter. It supports Pelco D/ P protocol,AD protocol, Bosch protocol and Sony protocol. -
Relay Timer Lite is a useful tool for NCD ProXR relay controller boards.It supports 1 board with 8 relays. Each relay can be programmed separately with multiple timers. Relay can be turned on/off manually. As the specialized software that intends to control the peripheral devices, the status of all relays can be shown. It can control the relays with very precise timer, while consuming the processor's resource at very low level. -
PTZ Controller is an application to control Pan Tilt Zoom High Speed Dome. It is a virtual keyboard for PTZ camera with functions of traditional PTZ keyboard hardware. It can control the PTZ camera through RS232 port directly, or through RS485/USB port with a converter. Meanwhile, it's also a good debug tool for PTZ camera's test and install. It is a robust, easy-to-use PTZ keyboard controller. -
Comm Operator is a powerful tool for serial port, TCP/IP and UDP port communication. It is professional software for debugging, testing and troubleshooting RS232 related devices. Data can be sent and received in Text/String, Hex and Decimal format. Auto send mechanics makes it a full functional device simulator. Send data list can be created from text file directly. All existed COM Ports can be detected automatically. -
Quick Timer High is high resolution timer for NCD ProXR relay boards. Quick setting and high resolution timer make it easy to use. It's quiet fit for accuracy control on light, science project, laboratory experimenter and home automation. It supports 16-relay channels. Each channel has a control panel separately. Relays can be turned on/off manually and automatically. Time can be set with counting down or up. -
Quick Timer PPC is an application for Pocket PC to control NCD ProXR relay boards. High resolution timer and quick setting make it easy to use for light control science project, laboratory experimenter and home automation. It supports 8-relay channels. Each channel has a control panel separately. Relays can be turned on/off manually and automatically. Time can be set with counting down or up. -
Quick Timer is a useful time control tool for NCD ProXR relay boards. Quick time setting makes it easy to use for science project, laboratory experimenter and home automation and so on. It supports one relay board with 16 relay channels. Each channel has a control panel separately. Relays can be turned on/off manually and automatically. Time can be set with counting down or up. It supports rapid buttons for control all relays directly. -
Relay Timer PPC is a useful tool for NCD ProXR relay controller boards with Pocket PC. It supports 1 board with 8 relays. Each relay can be programmed separately with multiple timers. Relays can be turned on/off manually and automatically according to the time setting. The status of all relays can be changed and displayed at the same time. It can run on PPC2003SE, WM5.0 and WM6.0. -
Comm Operator PPC is a powerful RS232 device emulator on Pocket PC.It supports communication with both serial port, include rs232, rs422, rs485 and TCP & UDP based protocol. It works with Wifi, Ethernet and Bluetooth besides normal serial port. It supports data in Text, Decimal as well as Hex format. It also can keep log of the sent and received data. All setting can be saved to a file and loaded later. -
Relay Timer is a powerful tool for NCD ProXR relay controller boards. It supports up to 16 relay boards. Each board has 16 relays. Each relay can be programmed separately and turned on/off manually. The status of all relays can be shown. It can control the relays with very precise timer, while consuming the processor's resource at very low level. It can detect all existed COM Port automatically. -
Comm Operator NCD Edition is a powerful tool for relay controller boards of National Control Devices. It can detect all COM ports automatically and send and receive data through it.The speed it supports range from 110 to 921600. It supports data input in decimal format.It includes commands for ProXR relay controller boards. It can keep log of the sent and received data. All setting can be saved to a file and loaded later. -
Comm Operator is a powerful tool for RS232. It can simulate the rs232 device, such as GPS receiver, total station, and software related. Using it, device can be developed without programming. Application can be debugged and tested without real device.Comm Operator can log the data to and from COM port and send data automatically. This version is a native .net program. It becomes steady and faster than before.