Resources for DXsoft [1 - 5 of 5]
  • SeaTTY 2.50

    A program to receive weather reports, navigational warnings and weather charts transmitted on longwave and shortwave bands. Supported modes are RTTY, NAVTEX and HF-FAX (WEFAX). It can decode GMDSS DSC (HF and VHF) messages. Software also can automatically save NOAA Weather Radio SAME voice messages (NWR SAME) and them digital headers. None additional hardware is required - your need only receiver and computer with a sound card. Audio output of receiver is connected to linear or microphone input ...

    DXsoft | | 1.46MB | 2015-01-14 14:12:57
  • TrueTTY 2.95

    A program for amateur radio digital communications via a sound card. Supported modes are RTTY (Baudot code), ASCII (7 or 8 bits), PSK31 (BPSK and QPSK), BPSK63, QPSK63, BPSK125, AMTOR-FEC (SITOR-B, NAVTEX), MFSK16, MFSK8. HF-PACKET and UHF-PACKET (AX25) are supported in KISS-TNC emulation mode. SELFEC SITOR, AMTOR-ARQ (SITOR-A) and DTMF-code decoding is also possible. No additional hardware required - you need only transceiver and computer (Pentium-100 or better) with a sound card. Optionally yo ...

    DXsoft | | 1.17MB | 2014-08-17 21:21:32
  • CallTTY TDD software 2.35

    A program to communicate with phone TTY/TDD devices (Telecommunications Devices for the Deaf) via a sound card, without TTY modem. A simple interface between sound card and phone line or acoustic connection with phone handset are used. Together with "Virtual Audio Cable" software CallTTY can work via Skype Internet-phone, without additional hardware at all.

    DXsoft | | 880KB | 2012-11-14 16:44:48
  • CwGet morse decoder 2.26

    Program to decode Morse code (CW) via sound card to text. It can work as narrow-band sound DSP-filter also. No additional hardware required - your need only receiver and computer (5x86-133 or better) with sound card. Can cooperate with RZ4AG AAlog logger. It is software Morse decoder that REALLY work!

    DXsoft | | 875KB | 2012-05-22 12:38:16
  • CwGet PPC 0.60

    A program to decode Morse code via sound input of PDA to text. No additional hardware required - your need only receiver and PDA with sound input. Built-in microphone of device can be used also.

    DXsoft | | 147KB | 2009-05-21 21:05:13