Resources for FabulaTech [1 - 14 of 14]
  • Printer for Remote Desktop 1.2.2

    Printer for Remote Desktop creates a virtual printer on the server and allows printing from any application in a remote session to a local printer. You don't need to plug your printer directly into the server machine to print in a remote desktop session (Microsoft RDP or Citrix ICA). You don't even need to install your printer's driver on the server! Now users can get separate access to their own printers regardless of how many printers are being redirected to the same server at the same time. ...

    FabulaTech | http://www.printer-for-remote-desktop.com/printer-for-remote-desktop.zip | 11.31MB | 2012-12-18 16:19:32
  • Virtual Serial Port Control 3.1.9

    If there is a task to provide interaction between communications application and your own program (e.g. serial device emulator), there is no common solution to accomplish it. It is considered that communications applications are intended to work only with hardware serial devices connected to physical serial ports. Virtual Serial Port Control is an ActiveX control which makes it possible to create virtual serial ports directly from your program and fully control them. At the same time virtual po ...

    FabulaTech | http://www.virtual-serial-port-control.com/virtual-serial-port-control.zip | 8.9MB | 2012-12-07 15:40:05
  • Serial Port Mapper 1.5

    Serial Port Mapper allows you to map any serial ports to any other serial ports. For example you install additional serial port expansion card to computer as COM7 serial port but your favorite software can work with COM1...COM4 ports only. To resolve this problem you can use Serial Port Mapper to map new COM7 port either to COM1 or to COM2...COM4. Now your software can open COM1 port (or COM2...COM4) but actually work with new COM7 port. Configuration via command line interface is available as w ...

    FabulaTech | http://www.serial-port-mapper.com/serial-port-mapper.zip | 2.41MB | 2012-11-23 13:32:07
  • Virtual Modem 2.1.1

    There are many old data-centric applications that, for historical reasons, use direct modem connections to exchange data between Client and Server. Nowadays, local and global TCP/IP networks have made the direct modem connection obsolete. Here's why: When you use a direct modem connection, you need to have a physical modem installed on each PC that needs to exchange data. You also must use a physical phone line. This makes the line busy and may even be costly, if long distance calls are requir ...

    FabulaTech | http://www.virtual-modem.com/virtual-modem.zip | 3.62MB | 2012-11-22 15:58:18
  • USB Monitor Pro 2.7

    USB Monitor Pro is an effective and, at the same time, simple in use analyzer of USB traffic for Windows. It allows to monitor incoming and outgoing data of a USB device plugged into the computer. Main program features are: - Monitoring of data between USB device driver and the Host Controller Driver - Comparison of packets before and after processing by the Host Controller Driver - Detailed information for each captured event USB Monitor Pro is a complete software solution, so you don't need ...

    FabulaTech | http://www.usb-monitor.com/usb-monitor-pro.zip | 6.43MB | 2012-11-22 13:52:38
  • Serial Port Control 2.3.1

    Software developers can access various devices by utilizing the Windows API. When using an API, you gain access to a full spectrum of available features, but API programming is a very tough and time-consuming task. You have to study the documentation and you have to create all the high-level functionality based on the low-level API functions from scratch. This is OK if you develop a specialized application. However, in most cases, you just want to get a certain device working in your progr ...

    FabulaTech | http://www.serial-port-control.com/serial-port-control.zip | 4.19MB | 2012-11-22 09:52:17
  • Virtual Serial Port Kit 5.4.1

    Virtual Serial Port Kit creates pairs of virtual serial ports in your system which are virtually connected to each other. Physical null modem cables are not required. You can connect any number of virtual port pairs. Virtual serial port pairs will look and work exactly like real hardware serial ports connected via null modem cables.Virtual Serial Port Kit is designed for software developer to speed up development process during debugging and data-logging period and cut months or even years from ...

    FabulaTech | http://www.virtual-serial-port.com/virtual-serial-port-kit.zip | 3.64MB | 2012-11-21 12:16:14
  • Serial Port Splitter 4.3.3

    Serial Port Splitter allows to share dataflow of one COM port between several applications or vice versa to join dataflow of several COM port devices to one application. Such program universality is achieved by means of virtual serial ports technologies. Moreover Serial Port Splitter allows to setup READ/WRITE or READ ONLY mode for splitted ports and READ/WRITE or WRITE ONLY mode for joined serial ports. Program features: - One COM port can be splitted up to 254 virtual ports - One COM port ca ...

    FabulaTech | http://www.serial-port-splitter.com/serial-port-splitter.zip | 4.21MB | 2012-11-21 08:54:22
  • Network Serial Port Kit 5.8.1

    Network Serial Port Kit allows you to connect any serial port devices over the TCP/IP network or Internet. Creation of local virtual serial ports pairs are available as well. Program creates up to 254 virtual serial ports at a time. Physical COM ports located on remote computer can be connected to host computer over the network as well. You can connect data collection serial devices: bar code scanners, modems, sensors, meters, gages, RF equipment, telephone PBX systems, laboratory or industrial ...

    FabulaTech | http://www.network-serial-port.com/network-serial-port-kit.zip | 5.36MB | 2012-11-20 14:30:52
  • Serial Port Redirector 2.6.1

    Serial Port Redirector is used to connect a serial application to a remote TCP socket. This allows you to utilize modern hardware COM servers without changing your software or exchange data between a TCP/IP application and an old-fashioned program that can only connect to a serial port. Serial Port Redirector creates a two-way bridge between a serial application and a specific TCP port at a specified IP address. This is done by creating virtual COM ports. When a serial application connects to o ...

    FabulaTech | http://www.serial-port-redirector.com/serial-port-redirector.zip | 5.3MB | 2012-11-20 10:44:58
  • Webcam for Remote Desktop 2.0

    Webcam for Remote Desktop is software by FabulaTech that redirects a webcam from local computer to remote desktop session. It is created exclusively for webcam high-level redirection. Supporting both RDP and Citrix ICA, Webcam for Remote Desktop creates a virtual webcam on the server side, which gets video stream from the webcam plugged to user's local computer. The software compresses video stream before the transfer, thereby both bandwidth utilization and latency are consequently reduced. The ...

    FabulaTech | http://www.webcam-for-remote-desktop.com/webcam-for-remote-desktop.zip | 10.62MB | 2012-11-19 11:07:40
  • Sound over RDP 2.9

    Sound over RDP is a sound virtualization tool which was built specifically to share sound devices from the local machine to the remote computer. Many applications use sound for various forms of feedback such as softphones, Skype, NetMeeting, AIM, ICQ and many others. Sound for remote desktop extends standard RDP functionality and delivers full high-resolution low-latency remote audio playback. The program is really simple to handle. You just need a working sound device, install the Workstation o ...

    FabulaTech | http://www.sound-over-rdp.com/sound-over-rdp.zip | 5.71MB | 2012-11-16 14:33:03
  • USB for Remote Desktop 3.1.3

    Access your local USB devices while working in remote Windows session. Sometimes, while working in remote desktop, you need access to your local devices. You can easily redirect disk drive or a printer into remote Windows session. But why can't you redirect all the rest of your USB devices just as easily? Unfortunately there is no standard way to make local USB devices available in remote Windows session. The only standard solution is plugging USB device directly to the remote server. But in the ...

    FabulaTech | http://www.usb-over-network.com/usb-for-remote-desktop.zip | 7.93MB | 2012-11-16 09:58:52
  • USB over Network 4.7.4

    You can easily share an external USB drive or a printer over a network. But why can't you share all the rest of your USB devices just as easily? Lab instruments, scanners, cameras, card readers, bar code scanners, PDAs, USB keys and others are usually considered to be non-shareable. Thus, normally you need to move your USB devices from one computer to another. Sometimes, though, this is not an easy task, especially when you need to use a device that is physically located in another building or e ...

    FabulaTech | http://www.usb-over-network.com/usb-over-network.zip | 8.28MB | 2012-11-15 15:56:42