Resources for MITCalc [16 - 30 of 33]
  • MITCalc - Tension Springs 1.19

    The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, loaded with static loading. . Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Automatic design of the spring. - Selection of an optimal alternative of the spring design in view of strength, geometry and weight. - Strength check of the spring. - Support ...

    MITCalc | http://www.mitcalc.com/download/MITCalcSprTens01.exe | 1.83MB | 2013-01-20 08:00:44
  • MITCalc - Pinned couplings 1.16

    The calculation is intended for the geometric design and strength check of couplings using pins and clevis pins. The program is used to solve the following tasks: design of pin for spring attachment, design of couplings with securing pins, design of cross pin in rod and sleeve, design of radial pin for shaft-hub connection, design of longitudinal pin for shaft-hub connection, design of clevis pin for rotating rod-clevis connection, strength check of designed couplings. The program includes d ...

    MITCalc | http://www.mitcalc.com/download/MITCalcPins01.exe | 1.56MB | 2013-01-19 11:28:07
  • MITCalc3D for Autodesk Inventor 1.61

    MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, s ...

    MITCalc | http://www.mitcalc.com/download/MITCalcINV.exe | 28.84MB | 2013-01-19 08:59:29
  • MITCalc - Bevel Gear Calculation 1.17

    Geometric design and strength check of bevel gear with with straight, helical and curved toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of straight, helical and curved toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including cor ...

    MITCalc | http://www.mitcalc.com/download/MITCalcBGear01.exe | 1.88MB | 2013-01-19 06:29:50
  • MITCalc - Bolted connection 1.21

    The calculation is designed for a geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Automatic design of a connection bolt of standard design. - Calculation and check of connections fitted with special shanks. - Design and cal ...

    MITCalc | http://www.mitcalc.com/download/MITCalcBoltCon01.exe | 1.66MB | 2013-01-18 18:26:06
  • MITCalc - Rolling Bearings Calculation II 1.17

    This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc., MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Bearing, McGill Manufacturing Co. ...

    MITCalc | http://www.mitcalc.com/download/MITCalcBearingB01.exe | 2.26MB | 2013-01-18 15:52:23
  • MITCalc - Internal Spur Gear Calculation 1.17

    Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing (internal). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corr ...

    MITCalc | http://www.mitcalc.com/download/MITCalcSGearI01.exe | 2.23MB | 2013-01-18 13:11:44
  • MITCalc - Plates 1.13

    This calculation deals with the deflection, stress and variation of forces in the loaded flat plates. The calculation is designed for plates that are flat, homogeneous, with the same thickness and made from one material. The plates may be circular, annular circular and rectangular. The plates may be loaded evenly (unevenly) on the whole surface (or its part) or they may be loaded by the force distributed on the circle. The programme enables: - Selection from circular, annular circular or rectang ...

    MITCalc | http://www.mitcalc.com/download/MITCalcPlates01.exe | 1.61MB | 2013-01-18 10:11:24
  • MITCalc 1.61

    MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, pins, buckl ...

    MITCalc | http://www.mitcalc.com/download/en/MITCalc001.exe | 19.64MB | 2013-01-18 07:20:17
  • MITCalc - Beam Calculation 1.18

    The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Simple definition of the type of beam and its loading with visual check. - Calculation of area characteristics of 20 types of cross sections. - Calculation of reactions in supports. - Calculation of minimum / maximum bend ...

    MITCalc | http://www.mitcalc.com/download/MITCalcBeam01.exe | 1.48MB | 2013-01-17 21:12:13
  • MITCalc - Rolling Bearings Calculation I 1.17

    This module can be used for the selection, calculation and check of rolling bearings of the company SKF. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load wi ...

    MITCalc | http://www.mitcalc.com/download/MITCalcBearingA01.exe | 2.48MB | 2013-01-17 17:36:51
  • MITCalc - Springs - 15 types 1.15

    The calculation is to be used for geometrical and strength design of metal springs of various types and designs, subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: 1) Geometrical design and calculation of working cycle parameters for metal springs of the following types and designs: - Helical cylindrical compression springs of round wires and bars - Helical cylindrical comp ...

    MITCalc | http://www.mitcalc.com/download/MITCalcSprings01.exe | 2.03MB | 2013-01-17 14:24:10
  • MITCalc - Welded connections 1.13

    The calculation is intended for the geometrical design and strength control of statically loaded welded connections of machine structures manufactured from carbon steels. The program enables you to design over 50 of the most common types of welded connections stressed by various combinations of load. The calculation deals with the following tasks: - Design of connections with butt welds. - Design of connections with fillet welds. - Design of connections with plug and slot welds. - Design of c ...

    MITCalc | http://www.mitcalc.com/download/MITCalcWelding01.exe | 3.94MB | 2013-01-17 11:42:49
  • MITCalc - Compression Springs 1.19

    The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical springs made of wires and rods of circular sections, loaded with static or fatigue loading. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Automatic design of a spring. - Selection of an optimal alternative of spring design in view of strength, geometry and weight. - Static and dynamic strength chec ...

    MITCalc | http://www.mitcalc.com/download/MITCalcSprComp01.exe | 1.7MB | 2013-01-17 09:41:57
  • MITCalc - Spur Gear Calculation 1.20

    Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing (external). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected tooth ...

    MITCalc | http://www.mitcalc.com/download/MITCalcSGear01.exe | 2.19MB | 2013-01-17 07:31:14