Resources for MITCalc [1 - 15 of 33]
  • MITCalc - Roller Chains Calculation 1.18

    The calculation is designed for a geometrical design and strength check of common chain transmissions using roller chains. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following tasks: - Selection of a power suitable type of chain. - Selection of an optimum transmission alternative regarding power, geometry and weight. - Calculation of geometric, strength, safety and operational parameters. - Calculation of power parameters and a ...

    MITCalc | http://www.mitcalc.com/download/MITCalcChains01.exe | 1.5MB | 2013-01-22 20:44:11
  • MITCalc - Multi pulley calculation 1.18

    The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels (max. 15). Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Calculation of the necessary length of the belt (chain) using known positions and diameters of sprocket wheels - Achieving the desired (table) length of the belt / chain using a change in the position of the selected sprocket wheel. - Calcula ...

    MITCalc | http://www.mitcalc.com/download/MITCalcMPulley01.exe | 1.39MB | 2013-01-22 18:23:09
  • MITCalc - Shaft connection 1.19

    Geometric designs and strength checks of shaped connections of shafts with hubs. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Design of a connection with parallel side keys. - Design of a connection with Woodruff's keys. - Design of a connection with straight-sided splines. - Design of a connection with involute splines. - Strength check of designed couplings. - The application includes a table of keys an ...

    MITCalc | http://www.mitcalc.com/download/MITCalcShaftcon01.exe | 1.63MB | 2013-01-22 11:22:45
  • MITCalc - Force shaft connection 1.18

    The calculation is intended for geometrical design and strength check of force couplings of shafts with hubs with a cylindrical contact area (Interference fit, clamping connection). The application provides solutions for the following tasks: - Design of force fits, possibly shrink fits. - Design of clamping connections with separated, or one-side cut hub. - Strength check of designed couplings. - Check of interference fit strained by additional radial force with bending moment. - Check of ...

    MITCalc | http://www.mitcalc.com/download/MITCalcShaftconF01.exe | 1.63MB | 2013-01-22 09:58:00
  • MITCalc3D for Solid Edge 1.61

    MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, s ...

    MITCalc | http://www.mitcalc.com/download/MITCalcSE.exe | 24.74MB | 2013-01-22 07:44:47
  • MITCalc - Torsion Springs 1.19

    The calculation is intended for the purposes of geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, cold formed, loaded with a static or cyclic loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Automatic design of the spring. - Selection of the optimal design of the spring with respect to strength, geometry and weight. - Static and dynamic ...

    MITCalc | http://www.mitcalc.com/download/MITCalcSprTors01.exe | 1.8MB | 2013-01-21 18:36:31
  • MITCalc - V-Belts Calculation 1.19

    The calculation is designed for a geometrical design and strength check of belt transmissions using V-belts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Calculation for 2 or 3 pulleys. - Automatic design of a transmission with the minimum of input requirements. - Design and calculation of geometrical parameters (diameters of pulleys, axis distances, length of the belt, weight of the transmission) - Calculat ...

    MITCalc | http://www.mitcalc.com/download/MITCalcVBelts01.exe | 1.63MB | 2013-01-21 15:53:42
  • MITCalc - Planet Gear Calculation 1.14

    Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing (external). - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected tooth ...

    MITCalc | http://www.mitcalc.com/download/MITCalcEPCGear01.exe | 2.01MB | 2013-01-21 13:44:41
  • MITCalc3D for SolidWorks 1.61

    MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, s ...

    MITCalc | http://www.mitcalc.com/download/MITCalcSW.exe | 25.89MB | 2013-01-21 12:21:18
  • MITCalc - Rolling Bearings Calculation III 1.15

    This calculation can be used for the selection, calculation and check of rolling bearings of the company FAG, INA. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation ...

    MITCalc | http://www.mitcalc.com/download/MITCalcBearingC01.exe | 2.38MB | 2013-01-21 08:54:58
  • MITCalc - Worm Gear Calculation 1.15

    Geometric design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of gearing dimensions. - Automatic transmission design with minimum input requirements. - Design for safety coefficients entered. - Calculation of a table of proper solutions. - Calculation of complete geometrical parameters. - Calculation of strength parameters, safety check. - Gearing design for ...

    MITCalc | http://www.mitcalc.com/download/MITCalcWGear01.exe | 1.89MB | 2013-01-21 07:01:55
  • MITCalc - Timing Belts Calculation 1.18

    The calculation is designed for a geometrical design and strength check of toothed belt transmissions. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Selection of the type of belt with a suitable output power. - Selection of an optimum transmission alternative in view of power, geometry and weight. - Option of designing a non-standard transmission. - Calculation of all necessary strength and geometrical param ...

    MITCalc | http://www.mitcalc.com/download/MITCalcTBelts01.exe | 1.5MB | 2013-01-20 18:52:48
  • MITCalc - Tolerance analysis 1.17

    Two programs for the tolerance analysis of linear, 2D and 3D dimensional chains 1) Tolerance analysis of linear dimensional chains. The program is designed for tolerance analysis of linear (1D) dimensional chains. The program solves the following problems: - Tolerance analysis, synthesis and optimization of a dimensional chain using the arithmetic "WC" (Worst case) method, possibly the statistical "RSS" (Root Sum Squares) method. - Analysis of a dimensional chain deformed as a result of tem ...

    MITCalc | http://www.mitcalc.com/download/MITCalcTolAnalysis01.exe | 2.77MB | 2013-01-20 16:13:31
  • MITCalc - Buckling Calculation 1.18

    The program is designed to calculate the optimum cross-section and perform strength check of slender struts strained for buckling. The program includes: - Selection of six basic types of buckling. - Calculation of area characteristics of 20 types of cross-sections. - Design of optimum profile accommodating the set load. - Strength check of the strut. - Calculation and graphical representation of permitted stress dependent on slenderness rate. - A table of materials and a table of area cha ...

    MITCalc | http://www.mitcalc.com/download/MITCalcBuckling01.exe | 1.49MB | 2013-01-20 12:20:18
  • MITCalc - Shafts Calculation 1.20

    The calculation is designed for geometrical design and complex strength check of shafts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Simple definition of installed shafts, including hollow ones. - Options of definitions of necking-down, recesses, grooves and calculation of the relevant coefficients of stress concentration. - Simple definition of spatial shaft load. - Calculation of reactions, courses of ...

    MITCalc | http://www.mitcalc.com/download/MITCalcShafts01.exe | 1.65MB | 2013-01-20 10:08:56